================================================================== Legal Information ================================================================== THIS SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE HEREBY DISCLAIMED. IN NO EVENT WILL ELECTRONIC ARTS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE, OR MALFUNCTION OF THIS ELECTRONIC ARTS SOFTWARE PRODUCT. SOME STATES DO NOT ALLOW LIMITATIONS AS TO HOW LONG AN IMPLIED WARRANTY LASTS AND/OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND/OR EXCLUSIONS OF LIABILITY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. ELECTRONIC ARTS RESERVES THE RIGHT TO MAKE IMPROVEMENTS IN THIS FILE AND TO THE SOFTWARE AT ANY TIME AND WITHOUT NOTICE. THIS FILE AND THE SOFTWARE HEREWITH IS COPYRIGHTED. ALL RIGHTS ARE RESERVED. NO PART OF THIS FILE OR THE SOFTWARE MAY BE COPIED, REPRODUCED, TRANSLATED, OR REDUCED TO ANY ELECTRONIC MEDIUM OR MACHINE-READABLE FORM WITHOUT THE PRIOR WRITTEN CONSENT OF ELECTRONIC ARTS. ================================================================== Electronic Arts Copyright ================================================================== Software and Documentation © 2006 Electronic Arts Inc. ALL RIGHTS RESERVED. ================================================================== The Lord of the Rings(tm), The Battle for Middle-earth(tm) II Version 1.0 Readme File March, 2006 ================================================================== Thank you for purchasing The Battle for Middle-earth(tm) II. This readme file contains information that will help you continue your journey across Middle-earth. ================================================================== System Requirements ================================================================== The Battle for Middle-earth(tm) II requires DirectX 9.0c To install DirectX 9.0c or later, visit: http://www.microsoft.com/windows/directx/default.aspx REQUIRED SYSTEM SPEC: · Microsoft® Windows® XP · PC with 1.6 Ghz equivalent or higher processor · 256 MB of system RAM · 512 MB of system RAM for online play with 3 or more players · 6 GB available hard disk space · 8x speed or faster CD-ROM drive or DVD-ROM drive (for the Collector's Edition) · 64 MB GeForce3-class video card. The game only officially supports cards with ATI (Radeon 8500 or greater) and Nvidia chipsets, and the Intel GMA 900 and GMA 950 products. The GeForce 4 MX is not supported. · Sound card with speakers or headphones · Microsoft Mouse or compatible pointing device · 56.6 Kbps or better modem for 1v1 online play · Broadband connection for online play with 3 or more players · DirectX 9.0c or above Please note that while you will be able to play The Battle for Middle-earth(tm) II with the specifications above, play experience can benefit from additional RAM, above the required 256 MB. ================================================================== Installation Instructions ================================================================== Before running The Battle for Middle-earth(tm) II, insure you have the latest drivers for your video and audio cards installed. You can download the appropriate drivers from your video and audio card manufacturer's Web site. Avoid running any other programs in the background, as this may conflict with the game. This includes any virus-protection program that you have running, which can hinder performance. To install The Battle for Middle-earth(tm) II: 1) Insert the primary The Battle for Middle-earth(tm) II installation disc into your DVD-ROM drive. If the disc does not automatically launch when inserted in the drive, you may have this feature disabled. To enable AutoPlay, please consult your Windows XP user manual. If you are unable or unwilling to activate AutoPlay, please browse to the location of The Battle for Middle-earth(tm) II DVD-ROM using Windows Explorer, double mouse-click the "Autorun" application in the root directory, and then click on the "Install" button on the following screen. 2) Follow the instructions that appear to install The Battle for Middle-earth(tm) II. 3) Please note that you must register The Battle for Middle-earth(tm) II when prompted to do so during the installation process in order to play the game online. You can register the game at a later time by clicking the "Register" button in the game's Online menu. If you are having difficulties with the CD key provided with The Battle for Middle-earth(tm) II, or require any other type of technical support, please click on the "Technical Support" button on the game's AutoPlay menu. You can also visit the official product Web site below and select the "Support" option. You will need to register your product for full customer support. http://www.ea.com/official/lordoftherings/bfme2/us/home.jsp ================================================================== Uninstalling The Battle for Middle-earth(tm) II ================================================================== To uninstall The Battle for Middle-earth(tm) II: 1) Bring up your Start Menu. 2) Choose "Control Panel". 3) Choose "Add/Remove Programs". 4) Highlight "The Battle for Middle-earth(tm) II" and click the "Change/Remove" button below its name. 5) Follow the instructions that appear to uninstall. ================================================================== Troubleshooting ================================================================== An outdated video or sound driver can lead to slow and choppy gameplay, or in some cases can prevent the game from running at all. To ensure an enjoyable experience with The Battle for Middle- earth(tm) II, be sure that you have the most recent video and sound drivers installed. These drivers are typically available for download from your system or hardware manufacturer’s Web site. If you are not sure what type of video or sound card you have, or you need assistance with updating the drivers on your system, please refer to the documentation that came with your system or peripheral. ================================================================== Save Games and Settings ================================================================== The Battle for Middle-earth(tm) II save files and other user-related settings are stored in the "My Battle for Middle-earth(tm) II Files" folder, which can typically be accessed by going to your C:\ drive, opening the "Documents and Settings" folder, opening the folder labeled with your Windows user name, and opening the "Application Data" folder. If you don't see an "Application Data" folder here, do the following: 1) Bring up any Windows Explorer window by holding down the Windows key on your keyboard and pressing "E". 2) Click on "Tools" from the top menu. 3) Choose "Folder Options" from the drop down menu. 4) Choose the "View" tab. 5) Click on the "Show hidden files and folders" radio button under "Advanced settings". 6) Click on "Apply" and then "OK". 7) The "Application Data" folder should now be visible. ================================================================== Command Line Parameters ================================================================== The Battle for Middle-earth(tm) II supports several command line parameters that will give you increased flexibility in the way that you run the game. To set a command line parameter, you need to do the following: 1) Go to the location of the game's executable. This is typically found in C:\Program Files\Electronic Arts\ The Battle for Middle-earth(tm) II\lotrbfme2.exe. 2) Right-click on the lotrbfme2.exe icon and select "Create Shortcut". 3) This will create a shortcut of the executable within the same folder. This will typically be called "Shortcut to bfme2.exe". 4) Right-click on this new shortcut and select "Properties". 5) Add a space to the end of the string in the "Target:" field, followed by a "-" and then the command line parameter. The following command line parameters are supported by The Battle for Middle-earth(tm) II: -noshellmap (Launches the game without the Argonath looping background) -mod (Allows modders to load custom assets into the game. Simply add the "-mod" command line after the lotrbfme2.exe target path, followed by the name of any user-created .big file or user-created directory. The correct path would look like this: "C:\Program Files\Electronic Arts\ The Battle for Middle-earth(tm) II\lotrbfme2.exe" -mod MyLOTRMod.big. All user-created content must be placed in the "My Battle for Middle-earth(tm) II Files" folder) -noaudio (Launches the game without any audio) -xres (Forces the game to a specific horizontal resolution) -yres (Forces the game to a specific vertical resolution) ================================================================== Known Issues ================================================================== On some video cards that are running dual-monitor setups, you may encounter visual distortions on the screen. If you encounter this issue, go to the game's "Main Menu" and click on "Options". Choose a different resolution under "Display Options" and then click on "Accept Changes". This should correct the problem. If you choose, you can switch back to your original resolution. You will experience problems running the game with a monitor set to "portrait mode". That is, if your monitor is set to display content vertically instead of in the traditional 4:3 aspect ratio. The Lord of the Rings(tm), The Battle for Middle-earth(tm) II only supports monitors running in 4:3 mode. Users with a Sony DDU-1612 DVD-ROM drive might experience issues with reading The Lord of the Rings(tm), The Battle for Middle-earth(tm) II DVD media. Users with these drives can upgrade to the latest firmware to resolve these issue, though we do not recommend it. IMPORTANT: You should always consult with your component's hardware manufacturer before attempting to flash its firmware. There is a known driver issue for the Nvidia GeForce FX 5000 family of video cards using version 81.98 or older drivers that result in broken textures on some of the game's structures. This issue has been resolved by Nvidia, and will be addressed with the next release of video drivers. There is a known issue on ATI X1300, X1600, and X1800 video cards running Catalyst 6.1 or older video drivers that result with some shadows disappearing and reappearing when the in-game camera is rotated. ATI is aware of this problem, and it should be addressed with the next release of their Catalyst drivers. There is another known issue with ATI video cards. There is a known crash when users attempt to Alt-Tab out of the game (during a load screen, for example) and then Alt-Tab back in. ATI is aware of this problem, and it should be addressed with the next release of their Catalyst drivers. You may encounter audio problems with some Creative Labs Audigy sound cards if you select the EAX3 option in the Options menu. Make sure you update your Audigy with the latest drivers. If you choose to select the EAX3 option, make sure that you have the proper speaker type selected in Windows. To do so, do the following: 1) In Windows, click on "Start". 2) Choose "Control Panel". 3) Choose "Sound, Speech, and Audio Devices". 4) Click on "Adjust System Volume". 5) Under "Speaker settings" click on "Advanced...". 6) Select the "Speakers". 7) From the "Speaker setup:" pull down menu, choose your applicable speaker setup. 8) Click on "Apply" and then "OK". If you have your screensaver enabled and it is activated while the game is loading any mission, the game will be minimized to your Windows taskbar, which is typically located at the bottom of your Windows desktop. If this happens, deactivate the screensaver and maximize the game by clicking on the "Lord of the Rings(tm), The Battle for Middle-earth(tm) II" button on the taskbar. You cannot listen to certain sounds in the game's WorldBuilder if "High Quality Audio" is set to "OFF". If “High Quality Audio” is turned "OFF" in the game’s options, the various “Listen” buttons in WorldBuilder will not work with certain sounds with names like “AmbientStream”. Also, “Listen to map” will not play those sounds. To listen to these sounds, you must run the game, click on "Options" and then "Settings" from the main menu, and click on the "High Quality Audio" checkbox. Please note that Windows XP with Service Pack 1 might cause problems with DirectX installation. ================================================================== Multiplayer Information ================================================================== When attempting to play The Battle for Middle-earth(tm) II online, please note that the minimum character length for your "Nickname" is four characters. If you attempt to login with a nickname that is three characters or less, the "Login" button will remain inactive. Please also note that the maximum allowable Nickname length is 15 characters; you cannot start your Nickname with any non-alphabet character; your nickname cannot contain any symbols i.e. @, #, $, etc; and your nickname cannot contain any spaces. ================================================================== NAT/Firewall ================================================================== If you are playing The Battle for Middle-earth(tm) II behind a USRobotics router, you will need to upgrade its firmware to the latest version, v2.7 or later. See the USRobotics support Web site for details on how to do so. If you are playing the game behind a D-Link router, you must check the "Send Delay" box in the Online Options menu for The Battle for Middle-earth(tm). To get here from the Main Menu, click on the Multiplayer button, click the Online button, login as you regularly would, and then click on Options after you have successfully logged on. Additionally, if you are playing behind a D-Link DI-704, you will need to upgrade its firmware to version 2.75 build 3 or later. See the D-Link support Web site for details on how to do so. Please note that if you have multiple players behind a single D-Link DI-604 connection, you may experience difficulty connecting. It should also be noted that some Belkin and USRobotics routers have irresolvable issues. If you frequently experience connection problems, you may want to use the port forwarding feature. If you are playing The Battle for Middle-earth(tm) II behind a software firewall, you will need to add the game's executable to the "Exceptions or Allowed Programs" list provided by your software firewall. You will need to provide your software firewall with the actual path to the game's executable. This file is typically located in "C:\Program Files\ Electronic Arts\The Battle for Middle-earth(tm) II\lotrbfme2.exe". You will also need to add the "game.dat" file, which is located in the same directory listed above, to this exceptions list*. Under the vast majority of cases you should not need to use the Port Forwarding/Port Triggering features to play the game behind your firewall. The Battle for Middle-earth(tm) II should work successfully behind most personal firewalls. However, if you frequently experience connection difficulties you can likely use Port Forwarding/Port Triggering to ensure improved reliability. If you have changed your router settings since the last time you played The Battle for Middle-earth(tm) II, you will need to click on the "Refresh NAT" button in the game's Online Options menu. To get here from the Main Menu, click on the Multiplayer button, click the Online button, login as you regularly would, and then click on Options after you have successfully logged on. The Battle for Middle-earth(tm) II uses UDP ports 8088-65535. If you are experiencing general NAT connection difficulties, exit the game, delete the options.ini file in your "My Battle for Middle-earth(tm) II Files" folder, restart the game, and click the "Refresh NAT" button in the Online Options menu. Additionally, if you are using a combination of a cable modem and a router, you should contact your ISP/cable provider in order to disable your modem's built-in firewall. ================================================================== Clan Matches ================================================================== The Battle for Middle-earth(tm) II supports clan games coordinated through the Clanwars website. A clan is a club of like-minded gamers that desire to compete together as a team. One of the most popular websites for organizing clans is a community run site called Clanwars. EA has partnered with Clanwars to help host clan management and statistics tracking for this game. Participation in a Clanwars clan is simple and free. To join or create a clan you can visit the site at http://www.clanwars.cc/bfme2. Click on the “Need Help Getting Started?” link to learn all about this exciting online feature. This information and the Clanwars site link are current as of February 2006, but is subject to change. Electronic Arts reserves the right to disable the reporting of clan match information to Clanwars at any time. CLANWARS IS NOT MAINTAINED OR OPERATED BY ELECTRONIC ARTS, OR ITS LICENSORS. TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. GAME CONTENT AND MATERIALS COPYRIGHT ELECTRONIC ARTS INC. AND ITS LICENSORS. ================================================================== *Administrator Privileges ================================================================== Please note that you may not be able to add The Battle for Middle- earth(tm) II to your software firewall's exceptions list if you are not logged in as an administrator in Windows. You will either need to do so from an account that has administrator rights, or add your existing account to the administrators list. To do so, do the following: 1) Log out of Windows and log in with an Administrator account. 2) Once logged in, click on "Start" in the Windows taskbar. 3) Choose "Control Panel". 4) Choose "User Accounts", followed by "User Accounts" again. 5) Select the "Users" tab. 6) Under "Users for this computer:" click on your account name. 7) Click on "Properties". 8) Select the "Group Membership" tab. 9) Select the "Other" radio button. 10) From the pull down menu, select "Administrators". 11) Click on "Apply" and then "OK". ================================================================== Credits ================================================================== The Lord of the Rings(tm), The Battle for Middle-earth(tm) II uses MP3 decoding technology. MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and THOMSON multimedia.